Comments on: Matter and Form 3D Scanner V2 Review https://www.3dmag.com/3d-scanners/matter-and-form-3d-scanner-v2-review/ 3D Mag — Explore the World of 3D Printing and Scanning with Latest News and Reviews Thu, 17 Oct 2024 16:21:38 +0000 hourly 1 https://wordpress.org/?v=6.7 By: Robert https://www.3dmag.com/3d-scanners/matter-and-form-3d-scanner-v2-review/#comment-16166 Sun, 12 Jul 2020 14:48:38 +0000 https://3dmag.artec3d.com/?p=5764#comment-16166 Hello,

First let me thank you for the review and the effort you put into it!

You said “Besides open-source DIY laser scanner kits like the $115 Ciclop, there are no other computer-connectable desktop 3D scanners that cost less than $750 so there’s little competition for the MFS1V2.”

Well, there is now – the SOL 3D Scanner from Scan Dimension.

It would be interesting to read a review about the SOL as well as a comparison to the Matter and Form V2 since they have nearly the same pricetag.

Thanks from Austria

Robert

]]> By: Marco https://www.3dmag.com/3d-scanners/matter-and-form-3d-scanner-v2-review/#comment-16135 Fri, 01 Nov 2019 08:50:28 +0000 https://3dmag.artec3d.com/?p=5764#comment-16135 Dear Nick,

thanks a lot for the nice and very detailed review.
I have a selfish suggestion to make. Since the Ein-Scan SE is a bit beyond my actual possibilities, I was thinking about purchasing the MF3DV2. However, I found this new entry, the SOL 3d scanner from Scan Dimension (https://scandimension.com/). It’s price, 599 USD, makes it very comparable to the MF3DV2.
Therefore, If you have the possibility, a review comparing the two 3d scanners would be really appreciated by me, and, hopefully, by others.

Thanks again,

Marco

]]> By: mrdweeb https://www.3dmag.com/3d-scanners/matter-and-form-3d-scanner-v2-review/#comment-16039 Wed, 15 Aug 2018 19:06:31 +0000 https://3dmag.artec3d.com/?p=5764#comment-16039 Another great review! Thanks for all your work in explaining scanning technologies, reviewing products, and comparing units.

]]>