Comments on: Bevel Smartphone 3D Scanner Review

By: login

Very nice article, just what I was looking for.

By: Lou Kik

Lou Kik — Sun, 20 Oct 2024 23:56:45 +0000

If you are going for best contents like myself, only go to see this web page everyday because it gives
feature contents, thanks

By: Untuk

Untuk — Sun, 20 Oct 2024 21:55:12 +0000

Hi, always i used to check webpage posts here in the early hours in the daylight, because i like to
gain knowledge of more and more.

By: Anonymous

Anonymous — Fri, 19 Mar 2021 16:27:36 +0000

Where can I find an iPhone holder like the one shown in picture four?

By: Masselvik

Masselvik — Sun, 01 Jul 2018 03:42:56 +0000

We love these! We turn the lights off and have a battle and my 4 year old blunto my 32 year old husband are having a blast. Got them got Christmas and they have been used often.

By: Craig

Craig — Thu, 24 Aug 2017 22:55:36 +0000

would it be possible to take multiple pics with this, and use a photogrammetry software to stitch them together to get a solid object?

By: DasKleineTeilchen

DasKleineTeilchen — Tue, 01 Aug 2017 07:17:32 +0000

there you go, their old site via wayback (remember, this was 2007, a decade ago):

https://web.archive.org/web/20070214022506/http://www.david-laserscanner.com:80/?section=Start

By: DasKleineTeilchen

DasKleineTeilchen — Tue, 01 Aug 2017 07:13:10 +0000

to bad that DAVID 3D laserscanner was acquired by HP; they introduced back in 2007 a handheld scanner, most like that one…well, the free(!) software for it, the “scanner” was just a cheap pointer with a line-generator-lens (cost me 10 bucks). still working with their old free software; its amazing, how much detail you get out of it, if you have a camera with decent resolution.

but as a handheld device for phones to make 3d-“selfies” is just
a bad idea.

By: Nick Lievendag

Nick Lievendag — Mon, 03 Jul 2017 10:03:57 +0000

In reply to Richard Wackerbarth. Typo indeed! Corrected. And I do hope the same. The software side has a lot of potential!

By: Richard Wackerbarth

Richard Wackerbarth — Sun, 02 Jul 2017 21:03:00 +0000

A slight “typo” — I received my Kickstarter Bevel in April, 2017, not 2016 as you indicate in your article.

And, like you, I was quite disappointed by its lack of usefulness. I hope that they will provide a capability to combine multiple scans to achieve a rendering of a complete object.